Product Manual A

4. Installation7-2018

Refer to local codes and standards for grounding procedures.

Battery

The generator set requires a 12V battery (negatively grounded) for engine cranking

and powering the electronic control system. When the generator set is running, the

battery is charged from the engine-driven battery alternator. When the set is not

running, an AC powered battery charger is needed to keep the battery charged.

CAUTION

Ensure that the AC power to the battery charger is disconnected when

installing the battery.

CAUTION

Wear proper safety protection when working around batteries. Keep open

flames and sparks away from the equipment.

NOTICE

Only personnel knowledgeable of batteries and required precautions should

perform or supervise battery servicing. Keep unauthorized personnel away

from batteries.

To connect the battery:

1. Connect the positive battery terminal.

2. Connect the negative battery terminal.

3. Make sure that the battery is secured to the battery tray with the strap provided.

4. Make sure that the black and red battery cable boots are in place.