Product Manual B
Table Of Contents
- Table of Contents
- 1. IMPORTANT SAFETY INSTRUCTIONS
- 1.1 Warning, Caution, and Note Styles Used in This Manual
- 1.2 General Information
- 1.3 Generator Set Safety Code
- 1.4 Moving Parts Can Cause Severe Personal Injury or Death
- 1.5 Electrical Shocks and Arc Flashes Can Cause Severe Personal Injury or Death
- 1.6 Fuel and Fumes Are Flammable
- 1.7 Batteries Can Explode
- 1.8 Exhaust Gases Are Deadly
- 1.9 The Hazards of Carbon Monoxide
- 1.10 Earth Ground Connection
- 2. Introduction
- 3. Control System
- 4. Operation
- 5. Maintenance
- 6. Troubleshooting

5. Maintenance7-2018
83A045R242 (Issue 12) Copyright © 2018 Cummins Inc.
NOTICE
Cummins Inc. does not recommend cleaning paper-type air cleaner
elements.
1. To remove the existing air cleaner element:
a. Before disassembly, wipe dirt from the cover and the upper portion of
the air cleaner.
b. Lift the latch (3) and turn the end cover (4) counterclockwise.
c. Pull the end cover (4) away from the housing (1).
d. Remove the air filter element (2) from the housing (1).
e. Dispose of the dirty element in accordance with local environmental
agency requirements.
2. To install the replacement air cleaner element:
a. Ensure that no debris enters the filter element or connection point on
the air cleaner housing.
b. Insert the air filter element (2) into the housing (1).
c. Install the end cover (4) onto the housing (1).
d. Turn the end cover (4) clockwise until the latch (3) snaps into place.