Product Manual A

4. Installation 7-2018

Install the transfer switch in accordance with the appropriate RA Series

Transfer Switch Owner Manual.

The following image is an example that shows the location of the connectors

in the generator set where the ATS DC control wires terminate. This is also

the location of the connectors where load management control wires (if

applicable) terminate.

NOTICE

Load management is only availble with air cooled product.

Refer to the Wiring Diagrams appendix for generator set to RA transfer switch

DC customer connections.

NOTICE

Class 1 wiring methods should be used for connecting the generator

set and transfer switch signal wiring.