Product Manual B
Table Of Contents
- Table of Contents
- 1. IMPORTANT SAFETY INSTRUCTIONS
- 1.1 Warning, Caution, and Note Styles Used in This Manual
- 1.2 General Information
- 1.3 Generator Set Safety Code
- 1.4 Moving Parts Can Cause Severe Personal Injury or Death
- 1.5 Electrical Shocks and Arc Flashes Can Cause Severe Personal Injury or Death
- 1.6 Fuel and Fumes Are Flammable
- 1.7 Batteries Can Explode
- 1.8 Exhaust Gases Are Deadly
- 1.9 The Hazards of Carbon Monoxide
- 1.10 Earth Ground Connection
- 2. Introduction
- 3. Control System
- 4. Operation
- 5. Maintenance
- 6. Troubleshooting
3. Control System7-2018
45A045R242 (Issue 12) Copyright © 2018 Cummins Inc.
3. If the Mode Change Access Code menu is enabled, the Mode Change Access
Code is displayed. Enter the Mode Change Access Code.
4. A menu with alternating arrows is displayed above a second symbol.
5. Press the second Manual Run button, and the generator set will now begin
the Manual start sequence. The Operator menu that was displayed before
Manual Run mode was selected is re-displayed, but with the symbol blacked
out.
NOTICE
To disable Manual Run mode, press the Off button.
NOTICE
Auto mode can also be selected while in Manual Run mode. Switching to
Auto mode may result in the generator set shutting down.