Product Manual A

5 Startup and Configuration

5.1 Time Setup (1-Phase ATS)

NOTICE

When battery power is lost, these settings must be reset.

NOTICE

Not applicable without a single phase RA series transfer switch.

To set up the generator set clock for the current date and time:

1. From any Information Menu, hold down the up and down arrows simultaneously

for two seconds. The Service Menu appears.

2. Access the Time Setup screen by selecting Clock Exerciser on the Genset

Service Menu.

3. Select Adjust.

When updating these settings, the functions of the keys are as follows:

• The horizontal right arrow key is used to select successive blocks for editing

settings on the screen.

• Select the left arrow to return to the previous screen.

• Adjust values by using the + or - keys on the Adjust Menu of the Time Setup

screen.

• Press Save to save any changes. After saving, the Save button changes to the

Adjust button.

FIGURE 18. TIME SETUP SCREEN