Product Manual A

2. Introduction 7-2018

CAUTION

A generator set must be operated and maintained properly if you are to

expect safe and reliable operation. The Operator Manual includes a

maintenance schedule and a troubleshooting guide.

The Health and Safety Manual must be read in conjunction with this manual

for the safe operation of the generator set:

• Health and Safety Manual (0908-0110)

• Warranty Statement (A040H442)

• Emissions Component Defect Warranty Statement (A028X278)

The relevant manuals appropriate to your generator set are also available. The

documents below are in English:

• Service Manual (A045R243)

• Parts Manual (A046Z094)

• EControls, Inc. Service Manual (A035C596)

• Global Control Platform (GCP) Engine Display Interface Software (EDIS)

Training Manual (A035C608)

• RA Series Transfer Switch Owner Manual (A046S594) (if applicable)

• PowerCommand® 1302 Controller Owner's Manual (900-0661)

• Standard Repair Times (SRT) Manual (A046Z674)

• Application Manual T-030 - for application information (A040S369)

• Service Tool Manual (A043D529)

2.4 Before Installation

Before beginning the installation of the generator set, verify that the unit was

correctly selected. Check the following features:

• Model

• Specifications

• Options

• Fuel Supply

◦ The gas supplied to the generator set must be of acceptable quality.

◦ The gas supply must have sufficient pressure. Care must be taken to be

sure that the gas supply at the generator set, not just at the source, is of

proper pressure for operation. The specified pressure must be available

while the generator set is starting and running at full load.