Product Manual B

3. Wiring 5-2019

FIGURE 19. 2-AMP POWERCOMMAND BATTERY CHARGER

No. Description No. Description

1 Reset Button 3 LED Status Indicator

2 Digital Display

FIGURE 20. 2-AMP CHARGER CONTROL PANEL

Battery Charger Configuration - The RESET button on the control panel (see Figure 20 is used to

configure the battery charger for the correct battery voltage. (More information on Setup menus is included

in the Battery Charger Operator's Manual.)

3.2.9.2 15/12-Amp Battery Charger

There are two types of 15/12-amp PowerCommand battery chargers (see Figure 22). All 15/12-amp

battery chargers have a 20 amp DC circuit breaker switch on the front of the battery charger. The 120,

208, and 240 VAC battery chargers include two 10 amp AC circuit breaker switches and a circuit breaker

guard, while the 277, 380, 416, and 600 VAC battery chargers include two AC fuse holders.

Control Panel - The 15/12-amp charger control panel includes a digital display, a Reset button, and an

LED status indicator (see Figure 21).

• The 2-line x 16-character digital display displays menus and faults.