Product Manual A

5. Control Panel Configuration 11-2017

5.1 Modifying the Configuration

The control has been configured at the factory and does not require additional adjustments. However, you

may wish to adjust some of the settings for your application.

CAUTION

Incorrect settings can result in the transfer switch failing to operate correctly. Only authorized

trained personnel should make changes to the control function settings. External Exercise,

System Nominal Voltage, System Nominal Frequency, and Single Phase/Three Phase settings are

made at the factory and should not require any additional adjustments.

1. Slide the selector switch to the Configuration Mode position. TDES is always the first function

shown when entering Configuration Mode.

2. Press the Test pushbutton to scroll through the various control function codes displayed with the first

five LEDs.

3. Once the desired function is selected, press the Override pushbutton to change the associated

value code displayed with the last three LEDs.

4. When configuration is completed, return the selector switch back to the Automatic Mode position.

FIGURE 16. NORMAL/CONFIGURATION MODE SELECTOR SWITCH

5.2 Adjustable Features

NOTICE

** signifies that the control function is set at the factory and should not require adjusting.