Product Manual A

5 Control Panel Configuration

The control panel can be used to configure ATS functions. When in Configuration Mode, the value code

for the various control functions can be modified.

The control panel has a series of eight LEDs that display codes that indicate various control functions that

can be configured. The first five LEDs display the function code and the last three LEDs display the value

code for the displayed function.

With the exception of the Test LED, the function and value LEDs are not lit during automatic operation

(Automatic Mode).

No. Description No. Description

1 Active Test LED 7 Set Exercise pushbutton

2 Function indicator LEDs 8 Active Exercise LED

3 Utility Power Available LED 9 Generator Set Power Connected LED

4 Test pushbutton 10 Generator Set Power Available LED

5 Utility Power Connected LED 11 Value indicator LEDs

6 Override pushbutton

FIGURE 15. CONTROL PANEL