Product Manual A

4. Operation 11-2017

2. To switch to Permanent On mode, press the – and +push buttons for approximately three seconds.

“PERM ON" is displayed and “Off" is switched back to “On." In addition, a continuous band of

segments is displayed on the top of the screen.

3. To return the clock to its original state, simultaneously press the + –and + buttons for approximately

one second. The original Home menu is redisplayed.

4.6.11 Adding A Security Code

A 4-digit security code number can be entered to prevent unauthorized personnel from using the clock.

Once a security code has been set up, the exercise clock is locked 75 seconds after the last keystroke. It

can only be operated again after the correct PIN code is entered.

CAUTION

Once a PIN code has been activated and the Reset button is pressed (see Resetting the Timer),

the exercise timer can no longer be activated without a valid PIN code.

1. From the Home menu, press the Menu button. The PROGRAM menu is displayed.

2. Press the + button 3 times. The OPTIONS menu is displayed.

3. Press the OK push button, then press the + push button until the PIN menu appears.