Product Manual A

4. Operation11-2017
510962-0131 (Issue 6) Copyright © 2017 Cummins Inc.
4.6.9 Initiating or Overriding an Exercise Program
The exercise clock has a built-in test feature that can be used to initiate an exercise that hasn't been
programmed or cancel a programmed exercise in progress.
The control panel Load/No Load function can be set to test the generator set with or without the load as
desired.
4.6.9.1 Initiating an Exercise
In the example shown below, “Off" indicates that no exercise is currently active.
1. With the Home menu displayed, simultaneously press the - and + buttons for approximately one
second. “OVERRIDE" and a hand symbol are displayed on the screen. In addition, “Off" is switched
to “On" to indicate the exercise is initiated.
2. To end the exercise, simultaneously press the - and + buttons for approximately one second. The
original Home menu is redisplayed and “On" is switched back to “Off."
4.6.9.2 Overriding an Exercise
In the example shown below, “On" indicates that an exercise is currently active.