Product Manual A

3. Description11-2017

No. Description No. Description

1 GND 5 Remote Test

2 2 6 Transfer Inhibit

3 B+ 7 Retransfer Inhibit

4 RMT 8 Common

FIGURE 11. CONNECTIONS FOR REMOTE OVERRIDE INPUT

NOTICE

TB1 and TB2 will accept 22 AWG - 12 AWG wire with 3/8 inch strip (10 mm). Torque to 9 in-lbs.

3.6 EC Control Panel

The EC control panel is located on the cabinet door.

The control features are divided into three groups:

• Control Function LEDs

• ATS Status LEDs

• Membrane Pushbuttons

3.6.1 Control Function LEDs

The control panel includes eight LEDs that display codes that indicate various control functions that can

be configured. The first five LEDs display the function code and the last three LEDs display the value code

for the displayed function.

With the exception of the first LED (Test), normally these LEDs are off and are only lit when in

Configuration Mode. The Test LED is also used to notify the user of test periods.