Product Manual A

3. Description 11-2017

No. Description No. Description

1 Reset button 3 LED status indicator

2 Digital display

FIGURE 10. 2-AMP BATTERY CHARGER CONTROL PANEL

3.5.1.2.2 2-Amp Battery Charger Configuration

The RESET button on the control panel is used to configure the battery charger for the correct battery

voltage. (More information on Setup menus is included in the Battery Charger Operator Manual.)

3.5.2 Auxiliary Relays Option

Auxiliary relays provide contacts for energizing external alarms, remote indicators and control equipment

such as louver motors and water pumps.

All relays have two normally open and two normally closed contacts that are rated for 10 Amps at 600

VAC. Connections to the auxiliary relays are made directly to the relay terminals.

There are two types of auxiliary relay coils:

• 12 VDC

• 24 VDC

3.5.3 Remote Override Input

To add remote override, connect a normally open, dry contact between P4-2 on the back of the control

panel and TB2-8. Closing the contact enables the feature and opening the contact disables it.