Product Manual
Table Of Contents
- Table of Contents
- 1. IMPORTANT SAFETY INSTRUCTIONS
- 1.1 Warning, Caution, and Note Styles Used in This Manual
- 1.2 General Information
- 1.3 Generator Set Safety Code
- 1.4 Moving Parts Can Cause Severe Personal Injury or Death
- 1.5 Electrical Shocks and Arc Flashes Can Cause Severe Personal Injury or Death
- 1.6 Fuel and Fumes Are Flammable
- 1.7 Batteries Can Explode
- 1.8 Exhaust Gases Are Deadly
- 1.9 The Hazards of Carbon Monoxide
- 1.10 Earth Ground Connection
- 2. Introduction
- 3. Control System
- 4. Operation
- 5. Maintenance
- 6. Troubleshooting
4. Operation 8-2019
52 A062J680 (Issue 2)Copyright © 2019 Cummins Inc.
FIGURE 18. GENSET STARTING
2. After the generator set reaches rated voltage and frequency, the transfer
switch transfers the building load to the generator set. The building's
electrical power is now provided by the generator set.
FIGURE 19. GENSET POWER
3. When utility power is restored, the sequence to transfer building load to
the utility begins.
4. The generator set continues to run and waits for utility power to stabilize.