Product Manual

3. Control System 8-2019
42 A062J680 (Issue 2)Copyright © 2019 Cummins Inc.
10. Click on the Accept button.
11. Enter your email address. Click the Send Verification Code button.
12. Check your email for the verification code and enter it in the Verification
code field.
13. Click the Verify Code button.
14. Create a new password.
15. Enter your first name and last name.
16. Click on the Create button.
17. Complete the required (*) fields on the Setup New Generator page:
a. Enter the contact information for the location.
b. Enter the Serial Number and Customer Access Code:
i. Find the Serial Number and Customer Access Code on the
generator set's control display by pressing Menu => Next =>
About => Next. The About Genset screen will appear on the
display.
c. Click on the "I'm not a robot" box and follow the directions.
d. Click on the Continue button.
If your generator set has an active Internet/cloud connection and your
serial number and customer access code are correct, and the generator
set is not already linked to another account, a message will appear on the
screen that says, "Your device has been located".
NOTICE
Communications on the network must be open to 168.61.54.255 on
port 8884 and 40.114.00.153 on port 8885.
18. Optional: Link your account to your local dealer. If you do not see your
dealer in the list, it is possible the dealer has not yet registered
themselves as a dealer on the Cummins Connect Cloud; in this case,
contact the dealer.
NOTICE
You can add or change your dealer at any time.
19. Optional: After you have registered and accessed your home page, add
additional users or generator sets to your account by navigating to
Preferences, My Generators, or Manage Users.
NOTICE
Android and iPhone applications for the Cummins ConnectCloud are
also available. Using a mobile application will enable you to receive
status and warning notifications.