Product Manual
Table Of Contents
- Table of Contents
- 1. IMPORTANT SAFETY INSTRUCTIONS
- 1.1 Warning, Caution, and Note Styles Used in This Manual
- 1.2 General Information
- 1.3 Generator Set Safety Code
- 1.4 Moving Parts Can Cause Severe Personal Injury or Death
- 1.5 Electrical Shocks and Arc Flashes Can Cause Severe Personal Injury or Death
- 1.6 Fuel and Fumes Are Flammable
- 1.7 Batteries Can Explode
- 1.8 Exhaust Gases Are Deadly
- 1.9 The Hazards of Carbon Monoxide
- 1.10 Earth Ground Connection
- 2. Introduction
- 3. Control System
- 4. Operation
- 5. Maintenance
- 6. Troubleshooting
3. Control System 8-2019
24 A062J680 (Issue 2)Copyright © 2019 Cummins Inc.
FIGURE 1. HINGE LOCATION
"Clock Setup" Screen
NOTICE
The Clock needs to be reset whenever the battery power is lost or
disconnected, or the control has entered “sleep” mode. Sleep mode is
entered after 30 minutes without utility or generator set power to preserve
battery energy since the battery charger will not have AC power. The 30-
minute timer is reset with any button press on the display.
NOTICE
The optional Remote Monitoring System (RMS) uses the generator set's
clock. The clock must be set accurately for the RMS to function properly.