Quick Start Installer

OPTIONAL REMOTE MONITORING SYSTEM (RMS) ACCOUNT SETUP AND GENERATOR SET CONTROL CONNECTION

1. Prior to setting up the new customer account, make sure that the generator set control is connected to the Internet via an

Ethernet cable between the generator set control and the home’s router.

2. To access the generator set control, open the generator cover and remove the right side control access panel.

3. Route the Ethernet cable into the generator set through the right side of the enclosure. Then route and secure the Ethernet

cable above the intake manifold along with the other customer wiring connections.

Ethernet Cable Routing

Ethernet Port on Generator Control

4. The Ethernet cable needs to be rated for 300V if it is routed through the same conduit as the AC load cables.

5. From a computer device, access the Cummins ConnectCloud website by navigating to https://connectcloud.cummins.com

6. Click on the Register button to start the registration process.

7. Follow the on‐screen prompts to register your account and add your generator.

Note: Cummins Connect Cloud Android and iPhone cellular apps are also available.

Note: Communications on the network must be open to 168.61.54.255 on port 8884 and 40.114.00.153.