Product Manual
Table Of Contents
- Table of Contents
- 1. IMPORTANT SAFETY INSTRUCTIONS
- 1.1 Warning, Caution, and Note Styles Used in This Manual
- 1.2 General Information
- 1.3 Generator Set Safety Code
- 1.4 Moving Parts Can Cause Severe Personal Injury or Death
- 1.5 Electrical Shocks and Arc Flashes Can Cause Severe Personal Injury or Death
- 1.6 Fuel and Fumes Are Flammable
- 1.7 Batteries Can Explode
- 1.8 Exhaust Gases Are Deadly
- 1.9 The Hazards of Carbon Monoxide
- 1.10 Earth Ground Connection
- 2. Introduction
- 3. Control System
- 4. Operation
- 5. Maintenance
- 6. Troubleshooting
3. Control System8-2019
39A062J680 (Issue 2) Copyright © 2019 Cummins Inc.
NOTICE
The following Internet browsers are compatible with this option:
• Microsoft Internet Explorer
®
(version 9 or greater)
• Apple Safari
®
• Google Chrome™
• Mozilla Firefox
®
(version 3.6 or greater)
• Microsoft
®
Edge
RMS Customer Account Setup and Generator Set Control
Connection
The following instructions for setting up an account and the generator set
control connection are for customers only.
1. Prior to setting up the new customer account, make sure that the
generator set control is connected to the Internet via an Ethernet cable
between the generator set control and your home router.
2. To access the generator set control, open the generator cover and
remove the right side control access panel.
3. Route the ethernet cable into the generator set through the right side of
the enclosure. Then route and secure the ethernet cable above the intake
manifold along with the other customer wiring connections.
4. Ensure the ethernet cable is securely inserted into the generator set
control.