Install Manual

Table Of Contents

4. Installation 8-2019

Lifting and Moving the Generator Set

WARNING

Heavy Load

The generator set is heavy. Handle with care.

Dropping the generator set can cause severe personal injury or death. Use

appropriate lifting techniques to move the generator set. Keep feet and

hands clear when lifting the generator set.

CAUTION

The generator set is shipped with oil in the engine crankcase. Keep the

generator set upright.

Securing the Generator Set to the Mounting Pad

The generator set should be securely attached to either a poured concrete slab or

prefabricated mounting pad (accessory pad) made of non-combustible material.

NOTICE

An accessory mounting pad is available that includes ½ -13 UNC x 1.25 inch

mounting holes located in the proper location for these generator sets. Two

hex head cap screws (½-13 x 3 inch long) provided with the accessory

mounting pad and flat washers are needed with this accessory pad. The flat

washers are included with the installation package provided with the

generator set.

1. Position the two spacers (which were shipped with the generator set)

appropriately on the generator set base.