Product Manual

Table Of Contents

1 Important Safety Instructions

Save these instructions. This manual contains important instructions that should be followed during

installation and maintenance of the transfer switch.

Safe and efficient operation can be achieved only if the equipment is properly operated and maintained.

Many accidents are caused by failure to follow fundamental rules and precautions.

1.1 Warning, Caution, and Note Styles Used in This

Manual

The following safety styles and symbols found throughout this manual indicate potentially hazardous

conditions to the operator, service personnel, or equipment.

DANGER

Indicates a hazardous situation that, if not avoided, will result in death or serious injury.

WARNING

Indicates a hazardous situation that, if not avoided, could result in death or serious injury.

CAUTION

Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

NOTICE

Indicates information considered important, but not hazard-related (e.g., messages relating to

property damage).

1.2 General Information

This manual should form part of the documentation package supplied by Cummins Inc. with specific

transfer switches. In the event that this manual has been supplied in isolation please contact your

authorized distributor.

NOTICE

It is in the operator’s interest to read and understand all warnings and cautions contained within

the documentation relevant to the generator set, its operation and daily maintenance.

1.2.1 General Precautions

Refer to NFPA 70E Standard for Electrical Safety in the Workplace to be sure the proper personal

protective equipment (PPE) is worn around this product.