Install Manual

ManualsBrandsCummins Power Generation ManualsGenerator AccessoryCummins 50-Amp Load Management Kit for 13kW, 17kW, and 20kW Cummins Air Cooled Generators

2

3

4

5

6

7

8

9

Table Of Contents

Page 11 of 11A051D263 (Issue 4) Copyright © 2017 Cummins Inc.

NOTICE

For information on setting up the control, see the load management information in the

service manual related to the specific model.

5. Replace the covers over the load shed box and the main service entrance circuit breaker or fuse

panel.

6. Reconnect the main service entrance circuit breaker or fuse.

7. Test loads. Load should be connected to the AC supply with the generator set off and be

disconnected when the generator set starts.