Manualshelf

Product Manual

ManualsBrandsCummins Power Generation ManualsGenerator AccessoryCummins Local Emergency Stop Switch For RS13-RS100 Standby Generators
891011121314151617
Table Of Contents
Page 15 of 17A045H700 (Issue 5) Copyright © 2017 Cummins Inc.
FIGURE 11. EXAMPLE OF EMERGENCY STOP HARNESS WIRING
14. Connect the control PE connector to the ESTOP-JE connector, and connect the control JE connector
to the ESTOP-PE connector.
See Figure 8 (for generator sets with a display panel knockout), Figure 9 (for generator sets with a
display panel rubber plug), or Figure 10 (for generator sets that require hole drilling); and Figure 11.
15. Re-install the roof panel (dome). Completed installations are shown below.