Product Manual

16
1-2019
Copyright © 2019 Cummins Inc.
A062R852 (Issue 1)
4. Follow the directions for manual starting on page 15.
5. Once the inverter starts the power from the machine
will automatically open the choke. If the machine
does not move the choke then push the choke
manually to the open position below:
Figure 12: Choke open
NOTICE
Depending on the ambient temperature and environment you may
need to close the choke half way for a successfully start.
HOW TO MANUALLY SET THE CHOKE
If the battery is dead or disconnected and you need to
manual start, you may need to set the choke by hand for
proper operation.
1. Remove the engine maintenance panel (see Figure
13 on page 20)
2. Locate the small black choke lever on top of the
carburetor.
Figure 10: Locate choke lever
3. To close the choke for cold starting, push the black
lever with a screwdriver to the closed position so it
looks like the image below.
Figure 11: Choke closed
MAINTENANCE