Product Manual

6-1
6. Information for California Genset Users
This genset meets the requirements of California’s
Exhaust Emissions Standards as stated on the
nameplate. Figure 1-1 illustrates where this infor-
mation appears on the nameplate.
As a California user of these gensets, please be
aware that unauthorized modifications or replace-
ment of fuel, exhaust, air intake, or speed control
system components that affect engine emissions
are prohibited. Unauthorized modification, removal
or replacement of the genset label is prohibited.
You should carefully review Operator (Owner),
Installation and other manuals and information you
receive with your genset. If you are unsure that the
installation, use, maintenance or service of your
genset is authorized, you should seek assistance
from an approved Onan dealer.
California genset users may use Table 2 as an aid in
locating information related to the California Air Re-
sources Board requirements for emissions control.
TABLE 2. EMISSIONS CONTROL INFORMATION
Genset Warranty Information
The California emissions control warranty statement is located in
the same packet of information as this manual when the genset is
shipped from the factory.
Engine Valve Lash See Specifications (Page 5-1).
Engine Ignition Timing See Specifications (Page 5-1).
Engine Fuel Requirements
Gasoline Models: The engine is certified to operate on un-
leaded gasoline. See Fuel Recommendations (Page 1-3).
LPG Models: The engine is certified to operate on LPG vapor.
See Fuel Recommendations (Page 1-3).
Engine Lubricating Oil Requirements See ENGINE OIL RECOMMENDATIONS (Page 1-3).
Engine Fuel Mixture Settings
These genset engines have precision-manufactured carburetors
which are not adjustable.
Engine Adjustments
Gasoline Models: See Altitude Adjustment on Page 2-4.
LPG Models: Not applicable.
Engine Emission Control System
The engine emission control system consists of internal engine
design.
Redistribution or publication of this document
by any means, is strictly prohibited.