Specification Sheet
Performance you rely on.
TM
cumminsonan.com
©2015 Cummins Power Generation Inc. | A-1399p (8/15)
and motor starting
Basic dimensions
Dimensions mm (in)
Note: This outline drawing is provided for general reference only and is not intended for design or installation. For more information see
Operation and Installation manuals or obtain drawing 500-3297 and wiring diagram from your distributor/dealer.
Accessories
Standard under floor mounting kit (P/N 403-3670)
bolts through floor
Under floor mount template (P/N 539-1535) for use
with under floor kit (P/N 403-3670)
Template for compartment mount (P/N 539-1546)
Base adapter under floor mounting kit (P/N 403-3630)
allows unit to mount using RV QG 5500 mounting kit
and for use with RV QG 5500 housing kit
(P/N 405-4241) or equivalent
Housing kit for under floor mounting (P/N 405-4241)
requires base adapter (P/N 403-3630)
Battery, 12 V, minimum 460 cold cranking amps at
0° F (-18° C)
Remote control panel including start-stop/prime
switch with status indicator light (P/N 300-5331)
Remote control panel including start-stop/prime
switch with status indicator light and hour meter
(P/N 300-5332)
Remote control panel including start-stop/prime
switch with status indicator light and DC voltmeter
(P/N 300-5333)
Remote control pigtail adapter (P/N 300-4946)
Remote control plug and wire harness 10 ft
(P/N 338-3489-01), 30 ft (P/N 338-3489-02)
Exhaust tailpipe kit (P/N 155-2845) tailpipe and special
hanger
Exhaust kit 1.5 in (P/N 155-2847) 90° elbow
Exhaust kit adapter (P/N 155-2850) straight tube
adapter
Energy command auto generator start EC-30
(P/N 018-02030)
Energy command remote start/stop with diagnostics
EC-20 (P/N 018-02020)
Energy command wireless start/stop EC-30W
(P/N 018-03000)




