Specification Sheet

Performance you rely on.
TM
cumminsonan.com
©2015 Cummins Power Generation Inc. | A-1399p (8/15)
Standard features
 Microprocessor control with digital voltage regulator
 Starter overcrank protection
 Generator set field overload protection
 Over/under frequency and voltage protection
 Loss of AC sense protection
 Mechanical fault protection
 Detects starter faults
 Reverse connections and high battery voltage
protection
 4-point vibration isolator mounting system
 Magnetic circuit breaker
 Automatic resetting of DC circuit overcurrent protection
for set wiring and remote start wiring
 Integral enclosure cover and stamped steel base
 Stationary exhaust pipe attachment point
 High stability mechanical governor
 Sealed remote start connector
 Fuel filter
 USDA Forest Service-approved, spark-arresting muffler
 Cross-flow pressure cooling
 Automatic choke
 Electric fuel pump with positive fuel safety shutoff
(gasoline)
 Electric fuel shutoff solenoid (LPG)
 125 in (3.2 m) generator set output leads
 Intake silencer, sound deadening material and baffles
reduce sound level
 Start-stop/prime rocker switch on control with LED
status indicator light for set diagnostics
Engine details
Model:
Cummins Onan E095H
Design:
4-cycle, OHV, single horizontal cylinder
Displacement:
18.5 in
3
(304 cm
3
)
Compression ratio:
8.5:1
Maximum power at 60 Hz:
LPG - 8.6 bhp (6.4 kW); Gasoline: - 9.5 bhp (7 kW)
Maximum power at 50 Hz:
LPG - 7.6 bhp (5.7 kW); Gasoline - 8.3 bhp (6.2 kW)
Cooling:
Cross flow air - pressure type
Cooling air volume:
Includes engine cooling air volume
60 Hz:
300 ft
3
/min (8.5 m
3
/min)
50 Hz:
250 ft
3
/min (7.1 m
3
/min)
Combustion air volume:
60 Hz:
19 ft
3
/min (0.5 m
3
/min)
50 Hz:
16 ft
3
/min (0.45 m
3
/min)
Side draft carburetor:
KY (gasoline)
Electric fuel pump:
Positive fuel shutoff (3 psi), fuel lift
3 ft (914 mm)
Air cleaner:
Replaceable dry element; patented
automatic choke
Vapor withdrawal system with demand regulator:
KY (LPG)
Ignition system:
Electronic magneto type
Starting system:
Remote, 12 V, 3-wire negative ground
Starter:
Automotive type with environmentally protected
pinion; automatic start disconnect
Lubrication:
Splash lubrication
Oil capacity:
1.6 qt (1.5 L)
Cylinder crankcase:
Aluminum alloy with iron cylinder
liner cast into the block, aluminum alloy oil base
Cylinder head:
Aluminum, valves in head, removable
Average fuel consumption
Gasoline No load Half load Full load
60 Hz 4.0 KY
0.3 Gal/h (1.1 L/h) 0.5 Gal/h (1.8 L/h) 0.7 Gal/h (2.7 L/h)
50 Hz 3.6 KY
0.2 Gal/h (0.8 L/h) 0.4 Gal/h (1.4 L/h) 0.6 Gal/h (2.2 L/h)
LPG No load Half load Full load
60 Hz 3.6 KY
0.4 Gal/h (1.5 lb/h) 0.7 kg/h 0.6 Gal/h (2.4 lb/h) 1.1 kg/h 0.7 Gal/h (3.1 lb/h) 1.4 kg/h
50 Hz 3.3 KY
0.3 Gal/h (1.1 lb/h) 0.5 kg/h 0.5 Gal/h (2.2 lb/h) 1.0 kg/h 0.7 Gal/h (2.9 lb/h) 1.3 kg/h
Alternator details
Design:
Cummins Onan revolving field, AC, 2-pole self-
excited; permanently aligned to engine by a tapered
shaft; drip-proof construction
Insulation system and temperature rise:
Meets
ANSI/RVIA-EGS-1-1998 and CSA TIL RV-06
requirements.
Cooling:
Direct drive centrifugal blower, cast aluminum
housing for excellent heat transfer
Voltage regulation:
Microprocessor control with
digital voltage regulator
Rotor:
Laminated electrical steel assembly press fitted
to shaft, balanced; heavy insulated copper wire
windings; amortisseur windings for improved waveform
Stator:
Laminated electrical steel assembly; heavy
insulated copper wire windings
DC brushes:
Electrographite; long life
Bearing:
Double-sealed, pre-lubricated ball bearing
Generator set performance
Air conditioner starting:
(60 Hz - gasoline) one 13500
Btu air conditioner with 2000 W base load at 500 ft
(152.4 m) and 100° F (38° C)
Frequency and voltage regulation:
Exceeds
requirements of ANSI/RVIA EGS-1