Instructions / Assembly

6
FILTER CARTRIDGE REPLACEMENT
• This model uses the WHR-140 filter cartridge.
• To ensure showerhead does not fall during filter change, it is
recommended that you detach it from the pivot assembly and let
it hang loosely.
REMOVE STICKERS FROM BOTH
SIDES OF NEW CARTRIDGE
BEFORE INSTALLING.
Place new filter cartridge into
position by pushing cartridge down
into cavity until seated.
Grasp white filter cartridge and
pull cartridge up and to the side to
remove and discard.
Hold the body of the pivot
assembly firmly in one hand. With
other hand, turn the
ribbed ring behind the face
clockwise until tight.
HOLD
LOOSEN
HOLD
TIGHTEN
Hold the body of the pivot
assembly firmly in one hand. With
other hand, turn the ribbed ring
behind the face counterclockwise
to unscrew.
1 2
43