Instructions / Assembly

4
INSTALLATION
• Installs on standard 1/2˝ threaded shower arm.
• This shower head will not function without a filter cartridge in place.
Remove existing showerhead
from shower arm by turning
counterclockwise.
Clean any debris that may be
present on the threads.
Wrap plumbers tape tightly
around shower arm threads.
1 2
Hold the body of the
pivot assembly firmly
in one hand. With the
other hand, turn the
ribbed ring behind the
face counterclockwise
to unscrew.
HOLD
LOOSEN
3
Hold the body of the
pivot assembly firmly
in one hand. With the
other hand, turn the
ribbed ring behind the
face clockwise until
tight.
HOLD
TIGHTEN
5
REMOVE STICKERS
FROM BOTH SIDES
OF NEW CARTRIDGE
BEFORE INSTALLING.
Place new filter into
postion by pushing
cartridge down into
cavity until seated.
4