Specifications
Item Description Part No.
1 AC Manifold 01-0047-02
2 Sediment Filter (5 Microns, 10/pack) 01-0001-20
Sediment Filter (1 Microns) 01-0056-72
6
13
3 Carbon Filter (Block, 12/pack) P1-0125-80
Carbon Filter (Block, 50/pack) 01-0126-00
7
Carbon Filter (GAC, 10/pack) 01-0001-21
3
4
5
11
4 Membrane (30GPD, 10/pack)
Membrane (30GPD, 50/pack)
01-0074-09
01-0074-08
2
5 Capillary Assembly 01-0090-25
17
15
6
7
Automatic Shutoff Valve
Drain Adapter (10/pack)
01-0044-31
P1-0042-92
16
8 Housing (Filter) x2 01-0044-30
9 Housing (Membrane) 01-0044-29
10 Clip (10/pack) P1-0055-37
10
11 Screw (25/pack) P0-4010-16
12 Mounting Bracket 01-0040-81
12
13 Chrome Faucet 01-0184-01
8
White Faucet 01-0184-02
9
Chrome Faucet w/ Light 01-0184-68
8
White Faucet w/ Light 01-0184-69
* Monitor (* Not Shown) 01-0196-19
15 Post Filter 3/8” Block (10/pack) 01-0146-12
Post Filter 3/8” Block (50/pack) 01-0146-13
Post Filter 3/8” GAC (10/pack) P1-0042-91
Figure 2
16
Post Filter 3/8” GAC (50/pack)
Storage Tank - 2 Gallon
01-0047-68
01-0050-95
Storage Tank - 3 Gallon 01-0047-76
Storage Tank - 9 Gallon 01-0047-65
17 Ball Valve 01-0045-50
• Reverse Osmosis Membrane
The RO membrane (4) reduces dissolved substances and other microscopic impurities such as asbestos, lead, sodium, and
others. It consists of a membrane envelope wound around a perforated tube. Product water diffuses through the membrane to
the inside of the envelope where it flows to and is collected by the tube. Impurities are flushed away in the concentrate stream.
The RO membrane featured in the Aqua-Cleer
®
/Good Water Machine
®
system offers exceptional contaminant rejection,
application versatility, and long life. The membrane material is sensitive to attack by chlorine. The activated carbon filter must
be maintained properly to prevent premature failure of the RO membrane.
The RO membrane (4), MAY be shipped wet in a preservative solution. This solution is present to prevent microbiological
growth inside the membrane. It must not be allowed to dry out or freeze as damage will likely result. Culligan may ship both
wet and dry elements depending on inventory. Wet elements are the result of batch quality testing and are no different than
dry elements. The outer packaging of wet elements will clearly state that the units contain a preservative solution.
NOTE: This preservative must be flushed from membrane before use. If ingested it may cause irritation of the
gastrointestinal tract, colic, diarrhea, or other similar symptoms. The manufacturer recommends discarding all the product
water for at least one hour of operation before drinking or use in food preparations. Culligan highly recommends discarding
the product water for a full 24 hours to flush the preservative and to properly hydrate the membrane for maximum
performance. The flushing procedure is on page 9.
• Capillary Assembly
The capillary assembly or concentrate flow control (5) regulates the flow rate of the flushing (concentrate) stream and to
maintain pressure in the RO membrane filter. It is located in the end of the manifold assembly. The assembly can be adjusted
to change the rate of the concentrate stream. The adjustment procedure is on page 8.
NOTE: Changing the capillary length voids the WQA listing. Remove the WQA data label from the system if you adjust the
capillary length.
• Automatic Shutoff
The automatic shutoff (6) automatically stops the flow of water through the Aqua-Cleer/Good Water Machine system when the
storage tank is full.
6 Aqua-Cleer
®
/ Good Water Machine
®