Specifications

Faucet Preparation
The Aqua-Cleer/Good Water Machine faucet may be assembled prior to installation in the customer’s home. Refer to the faucet
installation section beginning on page 15 for details.
Polishing Filter Preparation
The polishing filter must be flushed prior to use to remove any carbon dust generated during shipment.
1. Using 3/8” OD plastic tubing, connect the inlet of the filter to a source of clean filtered water (RO or DI water, if available).
Observe the direction of flow arrow on the filter.
2. Turn on the water supply and flush the filter with at least 2 gallons of water.
3. Turn off the water supply, disconnect the filter, and set aside for final installation.
10 Aqua-Cleer
®
/ Good Water Machine
®