Specifications

Flow Rate
Thisdisplaywillonlyshowiftheowmeterisattached
tothecontrol.Thedisplayshallshowthecurrentow
rate of the water passing through the control. The
displaywillshow“FLO”fortwosecondsandthenthe
currentowratepassingthroughtheowmeteruntila
key is pressed.
This display shall never time out, as opposed to the
rest of standard statistics
(10minutes).
Capacity Remaining (gal/ L)
Thisdisplaywillonlyshowiftheowmeterisattached
to the control. The display shows the gallons or liters
of capacity remaining in the batch before regeneration
will be triggered. The display will show “GALr” (“Litr” for
metric) for two seconds and then display the remaining
capacity.Whenreaching“0”thedisplaywillremainat
“0”andnotshownegativevalues.
This display shall never time out, as opposed to the rest
of standard statistic
(10minutes).
Number of Regenerations in Last 14
Days
This display will show the number of regenerations
thathaveoccurredinthelast14days.Thedisplaywill
rstshow“14dY”fortwosecondsandthendisplaythe
number of valid regenerations that have occurred.
Number of Days since Last
Regeneration
This display shows the number of days that have
elapsed since the last regeneration. The display will
show “dAYS” for two seconds and then the number of
days that have elapsed since the unit completed its
last valid regeneration.
Service Check
(cont.)
21