Specifications

These systems have been tested and certified by WQA according to NSF/

ANSI 372, and CSA B483.1, and NSF/ANSI Standard 58 for the reduction of the

substances listed below. The concentration of the indicated substances in

water entering the system was reduced to a concentration less than or equal

to the permissible limit for water leaving the system, as specified in NSF/ANSI

58.

Substance Removal

Substance Influent

Challenge

Concentration

(mg/L)

Max.

Permissible

Product Water

Concentration

(mg/L)

Minimum

Percent

Removal

Average

Percent

Removal

Barium 10.0 +/- 10% 2.0 88.40% 97.90%

Cadmium 0.03 +/- 10% 0.005 92.20% 99.20%

Hexavalent Chromium 0.30 +/- 10% 0.1 83.00% 88.50%

Trivalent Chromium 0.30 +/- 10% 0.1 92.50% 96.70%

Chromium (Hexavalent

& Trivalent)

0.3 +/- 10% 0.05 (Hex.)

& 0.05 (Tri.)

Copper 3.00 +/- 10% 1.3 95.30% 95.30%

Lead 0.15 +/- 10% 0.010 93.50% 98.40%

Radium 226/228

25 pCi/L +/- 10% 5 pCi/L 80.00% 80.00%

Selenium 0.10 +-/10% 0.05 93.90% 97.50%

1 While testing was performed under standard laboratory conditions, actual performance may vary depending on water

pressures, temperatures, and other substances which may be found in your water.

2 Based upon testing methods using Barium as a surrogate. All concentrations in pCi/L: Pico curies per liter.

Performance

Data Sheet

(cont.)