Specifications
Servicing
Your System
Service Schedule
When properly maintained, your Good Water Machine will give you years of dependable
service. Use the following as a guide to get the most out of your system. Service frequency
may vary depending on your local water conditions. High sediment, chlorine, turbidity, or
hardness levels may require more frequent service. Refer to Figures 3 & 4.
At Least Once Per Year
Replace:
• Particle Filter (1)
• Activated Carbon Filter (2)
• Polishing Filter (4)
Check:
• RO Membrane Filter (3)
- TDS Reduction Performance
- Flow Rates
• Capillary Assembly
Sanitize the System.
Use the convenient chart inside the back cover of this booklet to keep track of your system’s
maintenance.
Filter Replacement
Culligan recommends that you have your Good Water Machine serviced by your local
Culligan Man. You can rely on his or her experience and expertise to keep your system in
top operating condition.
If you wish to service your system, the filters are available from your Culligan dealer.
For replacement components, or to measure the Total Dissolved Solid (TDS) Reduction
Performance please contact your local Culligan Dealer or 1-800-CULLIGAN (1-800-285-
5442) for the dealer near you. See the Parts List at the end of this section for replacement
numbers.
Cartridge Conditioning
The activated carbon, reverse osmosis, polishing filter, and particle filter cartridges must be
conditioned as follows prior to installation into the Good Water Machine. Your Culligan Man can
do these important procedures at the time of purchase.
Activated Carbon Cartridge—10-minute flush to remove carbon dust
RO Membrane Filter—Minimum 24-hour flush to remove preservative solution
Polishing Filter—2-gallon flush to remove carbon dust
Particle Filter—10-minute flush
8