Specifications

4
01023052
Culligan High Efciency Twin Water Conditioners with
Aqua-Sensor
®
Device or Soft-Minder
®
Meter—Downow Regeneration
Model 9" Model 10" Model 12" Model 14" Model
Control Valve 1” Reinforced Thermoplastic w/ HE Circuit Boards
Overall Conditioner Ht 56 in 62 in 60 in 73 in
Media Tank Design Quadra-Hull
™
Media Tank Dimensions
(Dia x Ht)
9 x 48 in 10 x 54 in 12 x 52 in 14 x 65 in
Salt Storage Tank
Dimensions (Dia x Ht)
18 x 43 in 18 x 43 in 18 x 43 in 24 x 42 in
Exchange Media, Type
and Quantity
Cullex
®
Media, 1.0 ft
3
Cullex Media, 1.5 ft
3
Cullex Media, 2.0 ft
3
Cullex Media, 3.0 ft
3
Underbedding, Type and
Quantity
Cullsan
®
Underbedding, 12 lb
Cullsan
Underbedding, 15 lb
Cullsan
Underbedding, 20 lb
Cullsan
Underbedding, 25 lb
Exchange Capacity @ Salt
Dosage Per Recharge
17,854 gr @ 4.0 lb 26,781 gr @ 6.0 lb 31,352 gr @ 7.0 lb 51,726 gr @ 12 lb
27,108 gr @ 8.0 lb 40,662 gr @ 12.0 lb 48,458 gr @ 16.0 lb 75,582 gr @ 24 lb
31,736 gr @ 12.0 lb 47,604 gr @ 18.0 lb 59,267 gr @ 18.0 lb 88,549 gr @ 36 lb
Efciency rated dosage
1
4,463 gr/lb @ 4 lb
salt dosage
4,463 gr/lb @ 6 lb
salt dosage
4,479 gr/lb @ 7 lb
salt dosage
4,310 gr/lb @ 12 lb
salt dosage
Freeboard to Media
2
14.5 in 14.5 in 16 in 25 in
Freeboard to
Underbedding
3
44.5 in 47.5 in 46 in 59 in
Salt Storage Capacity 375 lb 375 lb 375 lb 600 lb
Rated Service Flow @
Pressure Drop
9.0 gpm @ 11 psi 9.4 gpm @ 12 psi 10.0 gpm @ 10 psi 10.6 gpm @ 11 psi
Auxiliary Flow Rate
4
10.8 gpm @ 15 psi 11.0 gpm @ 15 psi 12.6 gpm @ 15 psi 12.8 gpm @ 15 psi
Total Hardness, Maximum 75 gpg 99 gpg 99 gpg 99 gpg
Total Iron, Maximum 5 ppm
Hardness to Iron Ratio,
Minimum
8 gpg to 1 ppm
Operating Pressure 20-125 psi [138–862 kPa]
Operating Pressure
(Canada)
20-90 psi [138–621 kPa]
Operating Temperature 33-120°F [0–49°C]
Electrical Requirements 24V/60 Hz
Electrical Power
Consumption, Min/Max
8.4 watts/21.6 watts
Drain Flow, Maximum
5
2.5 gpm 2.5 gpm 3.0 gpm 5.3 gpm
Recharge Time, Average
6
Recharge Water
78 minutes 67 minutes 62 minutes 76 minutes
Consumption, Average
6
47 gallons 45 gallons 67 gallons 155 gallons
1 The efciency rated dosage is only valid at the stated salt dosage and is efciency rated according to NSF/ANSI Standard 44.
2 Measured from top of media to top surface of tank threads (backwashed and drained).
3 Measured from top of underbedding to top surface of tank threads.
4 Auxiliary ow rates do not represent the maximum service ow rate used for determining the softener’s rated capacity and
efciency and that continuous operation at these ow rates greater than the maximum service ow rate may affect capacity and
efciency performances.
5 Backwash at 120 psi.
6 10 minute backwash, 4 lb. 9” model, 6 lb. 10” model, 7 lb. 12” model, or 12 lb. 14” model salt dosage.
Specications