User Guide

Connect Your CUJO
There are two ways to connect your CUJO to your network:
1) Direct connection (DHCP mode) - CUJO is connected to the router as any other device.
This mode needs configuration changes on your router.
2) Bridged connection (Bridge mode) - CUJO sits in between your router (upstream) and
one of the following: a wireless access point, a network switch, or a another router. In
bridge mode, there is no configuration change needed for your upstream device. There
may be some configuration changes required on your downstream device. All devices
connected to your downstream device are protected.
Option 1: Direct Connection
Connect your CUJO just like any other device to your router. Use the bottom Ethernet port
on your CUJO and any open port on your router. Your router could be connected to a
modem or it could be connected to a combo router + modem.
With a direct connection, your CUJO can operate in two modes:
Copyright © 2017 CUJO LLC. Made in USA. 6
If you are having any issues activating CUJO, read the FAQs or contact us at 1-844-GET-CUJO or [e-mail]