User Guide

Compatibility

CUJO is compatible with all known routers in Bridge mode connected to CUJO’s bottom

port. In Bridge mode, you must also connect another device to CUJO’s top port:

● Access Point

● Switch

● Router running in "Bridge mode" or "Access Point" (AP) or “Wireless Access Point”

mode.

Also, you can make your router become a switch by:

○ Disabling the DHCP server on your router

○ Plugging the ethernet cable on your router from the WAN port to the LAN port

To connect CUJO in DHCP mode, the router must have the ability to turn off the DHCP

server (or the ability to change the router’s IP, please follow the exact steps on the app).

Most routers are compatible with this configuration.

Known exceptions:

● “Bridge mode only”



routers (incompatible with “DHCP mode”):

Eero, Google WiFi and Google OnHub

● “Unconfigurable ISP Router”



(no way to turn off DHCP server or change router’s IP)

that needs at least one other device running as an Access Point:

AT&T Uverse (NVG510), Technicolor (TC8715, TC8717), Huawei (B310, B683)

● Compatible only in CUJO Bridge mode while connected to the bottom CUJO port:

Luma

If you are having any issues activating CUJO, read the FAQs or contact us at 1-844-GET-CUJO or hi@getcujo.com