Quick Reference

Assembling the Sparkling Beverage Maker

1. Place base on a clean,

flat surface (see fig. a).

2. Push up lock switch

on back of unit and

remove the back

cover.

3. Remove shrink-wrap

seal and protective

cap from your

recyclable CO

cartridge valve.

4. Insert your recyclable

cartridge into the

back of the unit

vertically so that the

cartridge rests

comfortably in the

quick-connect holder

area (see fig. b).

5. Press firmly down on the CO

locking lever until the system snaps into

place (see fig. c).

6. Pick up the removable back cover with the two prongs facing down,

and insert them into the base of the unit. Push the cover toward the unit

to lock into place.

7. Place the removable drip tray in the base of the unit.

fig. b fig. c

fig. efig. d fig. f

fig. a

Sparkling Beverage Maker

QUICK REFERENCE GUIDE

PG-30254

ASSEmBLy INSTRUCTIONS

ASSEmBLy INSTRUCTIONS CONTINUES