Quick Reference

ManualsBrandsCuisinart ManualsSmall Kitchen Appliances1 l Sparkling Beverage Maker with 4 oz. CO2 Cartridge in Black

PROBLEM SOLUTION

Your Sparkling

Beverage Maker

isn’t carbonating

water

Be sure it’s in a fully upright position on a level surface.

Your cartridge may be empty. Full and empty weights are

listed on the cartridge.

Be sure beverage bottle is filled to the fill line.

After the

carbonating lever

is raised, gas is

still being released

DO NOT TOUCH CARTRIDGE, BEVERAGE MAKER OR

BEVERAGE BOTTLE UNTIL SOUND OF RELEASING

GAS HAS STOPPED COMPLETELY.

Carefully remove and set aside the beverage bottle.

Snap out the cartridge and replace with a new, full one

(return the used cartridge to your local participating

exchange retailer.)

If the above measures do not solve the problem, contact

Cuisinart Customer Service Center 1-800-726-0190.

The bottle is

overflowing during

the carbonating

process

Remove the bottle and be sure water is not above the

fill line.

Try pressing and releasing the activation lever more

quickly.

TROUBLESHOOTING CHART

IMPORTANT!

Do not throw away. Keep for future reference.

This Quick Reference Guide is intended to supplement the Instruction Booklet.

In order to ensure safe operation and optimum performance,

please read the entire Instruction Booklet.

Summary of content (4 pages)

PAGE 1
TROUBLESHOOTING CHART Problem Your Sparkling Beverage Maker isn’t carbonating water Solution Be sure it’s in a fully upright position on a level surface. Your cartridge may be empty. Full and empty weights are listed on the cartridge. Be sure beverage bottle is filled to the fill line. DO NOT TOUCH Cartridge, BEVERAGE MAKER OR Beverage BOTTLE UNTIL SOUND OF RELEASING GAS HAS STOPPED COMPLETELY. After the Carefully remove and set aside the beverage bottle.
PAGE 2
QUICK REFERENCE GUIDE Sparkling Beverage Maker Assembly Instructions Assembling the Sparkling Beverage Maker 1. Place base on a clean, flat surface (see fig. a). fig. a fig. b fig. c fig. d fig. e fig. f 2. Push up lock switch on back of unit and remove the back cover. 3. Remove shrink-wrap seal and protective cap from your recyclable CO2 cartridge valve. 4.
PAGE 3
Assembly Instructions CONTINUES 8. Fill your beverage bottle to the max fill line using cold purified water or tap water. 9. Tilt beverage bottle under the carbonating stem (see fig. d) and push beverage bottle vertically into the tilt head (see fig. e). 10. Rotate the bottle counter-clockwise until securely in place. Note: Hand tighten only. Do not use tools. OPERATING Instructions 1. Make sure your Sparkling Beverage Maker is properly assembled (see Assembly Instructions). 2.
PAGE 4
CO2 CARTRIDGE INFORMATION DANGER Read instructions and warnings on the recyclable CO2 cartridge. Separation of valve from cartridge may cause injury. Do not unscrew valve from cartridge. Compressed CO2 can cause cartridge or valve to fly off with dangerous force. Do not use cartridge and contact Cuisinart if valve is not tightly attached to the cartridge. WARNING • Cuisinart shrink-wrap seal must be removed from valve by purchaser before attaching cartridge to Sparkling Beverage Maker.