Blender/Food Processor Instruction Manual
7
CLEANING AND MAINTENANCE
Always unplug your Cuisinart
®
 SmartPower Duet
®
 Blender/Food 
Processor from the electrical outlet before cleaning. The blender is 
made of corrosion-resistant parts that are easy to clean. Before first use 
and after every use, clean each part thoroughly. Periodically check all 
parts before reassembly. If any part is damaged or blender jar is 
chipped or cracked, DO NOT USE BLENDER.
Remove the blender jar from the motor base by lifting straight up and 
away. Twist off the locking ring by turning counterclockwise. Remove 
the cutting assembly and rubber gasket. Wash in warm soapy water; 
rinse and dry thoroughly. Place the locking ring in the upper rack of the 
dishwasher or wash in warm water.
CAUTION: Handle the cutting assembly carefully. It is SHARP and may 
cause injury. Do not attempt to remove blades from cutting assembly.
Remove the blender jar cover and the measured pour lid. Wash in warm, 
soapy water; rinse and dry thoroughly, or place in the upper rack of the 
dishwasher. The blender jar should be washed in warm soapy water and 
rinsed and dried thoroughly. The blender jar can also be placed upside 
down in the dishwasher.
Finally, wipe the motor base clean with a damp cloth to remove any 
residue, and dry thoroughly. Never submerge the motor base in water or 
other liquid, or place in the dishwasher.
Tip: You may wish to clean your blender cutting assembly as follows: 
Squirt a small amount of dishwashing liquid into assembled blender jar 
and fill halfway with warm water. Run on Stir for 15 seconds. Repeat 
using clean tap water. Empty blender jar and carefully disassemble 
parts. Wash cutting assembly, gasket and locking ring in warm, soapy 
water. Rinse and dry all parts thoroughly.
QUICK REFERENCE GUIDE
FOR BLENDER FUNCTION
To activate blender      Press On- The blender is in On mode.
To begin blending      Press desired speed button.
To change speeds      Press desired speed button.
To pulse        In On mode press Pulse, then press and 
        release desired speed button as needed.
To crush ice      In On mode, press and release Ice Crush 
  button as needed.
To stop blending and deactivate blender  Press Off button.
To stop blending in Pulse or Ice Crush mode  Release button.
 To stop blending in Stir, Chop, Mix, Purée,  Press speed button again. This will return 
or Food Processor mode    the blender to On mode. Press Off button 
   to turn blender off. 
SPEED SELECTION GUIDE
FOR BLENDER FUNCTION
Refer to this guide to choose the best speed for your desired result. 
Ingredient/Recipe    Speed    Result
Reconstituting frozen orange 
juice concentrate    Stir    Smooth and full-bodied 
Mayonnaise    Stir    Thick and creamy
Salad dressings    Stir    Desired consistency
Nuts    Chop  Coarse to fine
Whipping cream    Mix    Thick topping
Bread crumbs  Mix  Uniformly fine
Grating citrus zest    Purée    Uniformly fine
Milk shakes    Purée    Smooth and creamy
Baby food      Purée    Smooth and creamy
Health drinks    Food Processor  Smooth and creamy
Frozen cocktails    Food Processor  Thick and slushy
Grinding hard cheese    Food Processor  Coarse to fine
Spices      Food Processor  Coarse to fine
Ice         Ice Crush    Snowy










