Specifications

3
UNPACKING
INSTRUCTIONS
1. Place the gift box containing your
Cuisinart
™
Stand Mixer Blender
Attachment on a flat sturdy
surface before unpacking.
2
. Remove the instruction booklet
and other printed materials from
the top of the corrugated insert.
Remove the top corrugated
insert.
3
. Carefully lift the Cuisinart
™
Stand
Mixer Blender Attachment from
the box.
4
. Remove the protective insert on
the handle.
To assemble the blender attachment,
follow the Assembly Instructions
below. Replace all corrugated inserts
in the box and save the box for
repackaging.
PARTS AND DIAGRAM
1. Cover
Just press on, no turning or
twisting required. Tight-fitting seal
resists leakage.
2
. 2-oz. (60 ml) Measured Pour Lid
Allows you to measure and
add ingredients without removing
the cover.
3
. 40-oz. (1.2 L) Glass Jar with
Dripless Pour Spout
4
. Sealing Ring (not shown)
on base to prevent leakage.
5. High Quality Cutting Assembly
with Patented Stainless Steel
Blades
6
. Collar
Before using for the first time:
Wash all parts according to the
Cleaning and Maintenance section on
page 4 of this booklet.
ASSEMBLY
INSTRUCTIONS
1. Make sure the sealing ring is
in place on the blade unit.
2
. Fit the blade unit inside the collar.
Carefully place the jar over the
blade unit and turn clockwise
until it is firmly in place.
3
. Fit the pour lid into the cover.
4
. Open the top cover on your
Cuisinart™ Stand Mixer.
2
3
5
1
6