Specifications

2
14. Always operate blender
attachment with the cover in
place.
1
5. Never leave your blender
attachment unattended while the
stand mixer is running.
1
6. When blending HOT liquids in
blender jar remove pour lid (centre
piece of cover) to allow steam to
escape.
1
7. To protect against the risk of
electric shock do not put the
power unit in water or other liquid.
1
8. Do not let cord hang over edge of
table or counter.
1
9. To reduce the risk of injury,
never place cutter-assembly
blades on base without jar
properly attached.
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD
USE ONLY
SPECIAL CORD SET
INSTRUCTIONS
A short power-supply cord is provided
with the stand mixer to reduce the risks
resulting from becoming entangled in
or tripping over a longer cord.
Longer extension cords are available
and may be used if care is exercised
in their use.
If a long extension cord is used,
the marked electrical rating of the
extension cord must be at least as
great as the electrical rating of the
appliance, and the longer cord should
be arranged so that it will not drape
over the countertop or tabletop where
it can be pulled on by children or
tripped over.
NOTICE
The stand mixer has a three wire
grounded plug. To reduce the risk of
electric shock, this plug will fit in a
polarized outlet only one way. If the
plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician.
Do not modify the plug in any way.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY
WARNING
RISK OF FIRE OR ELECTRIC SHOCK
DO NOT OPEN