Instruction & Recipe Booklet Mini Prep Pro - ECH-4 Series For your safety and continued enjoyment of this product, always read the instruction booklet carefully before using.
IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USING • When using any electrical appliance, especially when children are present, basic safety precautions should always be taken to reduce the risk of fire, electric shock and/or injury, including the following: • To use, plug cord to correct electrical outlet. When not in use and to safely store, disconnect from the electrical outlet by grasping and firmly pulling the plug; never pull the cord.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 2. Open the box and remove any other literature. • Serious injury may result from misuse. • Be careful when handling the sharp cutting blades, emptying the bowl and during cleaning. • Be careful if hot liquid is poured into the food processor or blender as it can be ejected out of the appliance due to a sudden steaming. 4.
PARTS & FEATURES A. Work-Bowl Lid/Cover To lock on top of work bowl before processing. A B. Safety Locking Switch The tab on the lid must be locked into the handle and engaged to allow the food processor to operate. B C. Stainless Steel SmartPower Blade For chopping, grinding & other food processing prep. D. Work Bowl 3-cup capacity (for dry ingredients) 450ml capacity (for liquid ingredients) C E. Motor Base With Chop & Grind functions F.
QUICK TIPS GUIDE Notes, Tips Size Quantity Tip: Always cut large pieces of food into smaller pieces of even size – about 1-2cm or as specified in the Quick Tips Guide in the Recipe Booklet on page 2. Tip: If you don’t start with pieces that are small & uniformed, you will not get an even chop. NB: Do not overload the work bowl. Overloading causes inconsistent results & strains the motor. Tip: As a rule of thumb, remember most foods should not reach more than 2⁄3 of the way up the work bowl.
OPERATING INSTRUCTIONS CLEANING & 1. Always use the appliance on a dry, level MAINTENANCE work surface. 2. • When not in use, leave unplugged. Place the work bowl firmly on the housing base. You will see on the base, there are instructions and arrows in which show the direction of the work bowl to be locked. Place the work bowl with handle to your left and turn anticlockwise. 3. Carefully lift and place the SmartPower blade over the work-bowl centre stem until it drops to the bottom.
www.cuisinart.com.au ©2023 Cuisinart Suite 101 Ground Floor 18 Rodborough Rd Frenchs Forest NSW, 2086 Australia Visit our Website: www.cuisinart.com.au Printed in China Trademarks or service marks of third parties referred to herein are the trademarks or service marks of their respective owners.
