Specifications

9
B Fitting And Removing The Plates
To t the plates:
ß Place the appliance in the at position with the controls directly in front of you (refer to section A
“Selecting Griddle & Grill Position’’)
ß Each plate is embossed with ‘Lower’ or ‘Upper’. Select the ‘Lower’ plate that you intend to cook with
(grill or griddle). Hold it at with the grease spout pointing towards you and the ‘Lower’ sign facing up.
ß Align the two cut outs at the back of the plate with the brackets on the bottom of the housing base.
Tilt the back of the plate and slide it underneath the brackets. Push down the front end of the plate
until it locks into place.
ß Select the matching plate (grill or griddle) and with the ‘Upper’ embossed sign facing up and the grease
spout pointing away from you. Align the plate with the brackets and push down the front to the lock
into position.
To remove the plates:
ß Adjust the appliance to the at position (refer to section A, Selecting Grill & Griddle Position).
ß Locate the plate release buttons on the right side of the units’ upper and lower housing. Press the ‘Upper’
release button rmly and the Upper plate will pop up slightly from the base. Lift the plate up and slide
out from under the brackets in the centre.
ß Press the button on the Lower housing and repeat the above method to remove the Lower plate.
ß N.B: Always allow the appliance to cool for at least 30 minutes before removing the plates.