User Manual

TURNING OFF THE GRILL:

1. Turn off the cylinder valve.

2. Turn all burner control knobs to the “OFF” position.

Note: Turn off LP cylinder  rst to prevent gas from being left in the system under pressure.

CAUTION:

• The cylinder valve should always be in the off,

or closed, position when the grill is not in use.

To turn off the cylinder valve,

turn knob clockwise until it stops.

ROTISSERIE COOKING:

• Your grill was pre-drilled from the factory to include mounting holes for a rotisserie (sold separately).

• Read and follow all instructions provided with the rotisserie. Save instructions for future reference.

• When using an AC current rotisserie, it must be electrically grounded in accordance with local

codes, or in the absence of local codes:

• In the US: The National Electrical Code – ANSI-NFPA No. 70 – Latest Edition

• In Canada: the Canadian Electrical Code – CSA C22.1

• The Rotisserie is equipped with a three pronged plug for your protection against electrical

shock. This plug should be plugged directly into a properly grounded 3 prong receptacle. Never

cut or remove the grounding plug. Any extension cord must also have a 3 prong receptacle.

• All electrical supply cords should be kept away from water and any hot surfaces of the grill.

WARNING