Quick Reference

MAKING ESPRESSO
Use lever to open brew head.
Place an espresso cup on
the fold-down tray.
Insert an illy iperEspresso capsule
and close brew head.
Press single or double
espresso button to brew.
Problem: Coffee is too hot.
Solution:
• Press the HOT
button and wait until the light is steady.
Problem: Coffee is not hot enough.
Solution:
• PresstheHOTTER SETTING
button and wait until the light is steady.
• Ifstillnothotenoughathottersetting,usethemanual
button to despense a
cupofwatertopreheat,thenmakeyourespressoasindicatedonpage6.
Problem: SHORT
/LONG buttons flash quickly; all buttons are
non-functional; or some buttons are off.
Solution:
• Thatindicatesthecoffeeboilerdetectsloworhightemperature.Recoverthe
unitbyunpluggingitandlettheunitcooldownforapproximately10minutes.
Problem: Short
/Long /Manual/
Steam
buttons flash.
Solution:
• Refillthewaterreservoirormakesureitisproperly engaged on the base.
Problem: Steam
/Cappuccino /Latte buttons are non-functional or off.
Solution:
• Installorproperlyengagethemilktankwithnocapsule in the brew head.
TROUBLE SHOOTING CONTINUED
QUICK REFERENCE GUIDE
For more helpful hints see Instruction Booklet
1.
3.
2.
4.
IMPORTANT!
Do not throw away. Read before operating your new food processor.
Keep for further reference.
PG-30769
BEFORE FIRST USE
1. Remove lid from water reservoir. Lift off base with handle and fill with fresh cold water. Replace reservoir
and lid. Using tracks as guide, slide back into position and push down firmly.
2. Insert plug into power outlet and press power button once. Controls will flash as unit preheats; lights turn
steady when ready.
3. Place a mug on drip tray, then press Manual button and dispense water for 5 to 10 seconds. Press
again to stop flow.
4. Place espresso cups on warming plate. Lights will all be on and steady. The machine is now ready to use.
Buona Tazza
™
Single Serve Espresso Machine
Buona Tazza
™
Single Serve Espresso Machine