Operating instructions
IMPORTANT
UNP ACKING
INSTRUCTIONS
This package contains a
Cuisinart
®
Premier Series
11 Cup Food Processor,
and the standard parts for
it:
Work bowl, work bowl
cover, large and small
pushers, PowerPrep
Metal Dough blade,
metal chopping/mixing
blade, slicing disc,
shredding disc, detachable
disc stem for discs, spatula,
How-to DVD and
recipe/instruction book.
CAUTION:
THE CUTTING TOOLS
HAVE VERY SHARP
EDGES. To avoid injury
when unpacking the parts,
please follow these
instructions.
1. Place the box on a low
table or on the floor
next to the kitchen
counter or table where
you intend to keep the
food processor. Be
sure the box is right
side up.
2. Remove the cardboard
insert. You will see a
rectangular block of
plastic foam that holds
the processor parts,
each fitted into a cavity
in the foam.
3. The Detachable Disc
Stem for the discs (A)
sits in a cavity in one
corner of the foam
block. Remove this
first.
4. The Pusher Assembly,
with large and small
pushers, (B) sits in the
adjacent cavity.
Remove this next.
5. The PowerPrep Metal
Dough Blade (C) rests
in a cavity on the
opposite side of the
foam block. Remove it
from the foam.
6. The plastic Spatula (D)
is on one long side of
the foam block.
Remove it next.
7. The Slicing Disc (E) is
on the edge of one of
the long sides of the
foam block; the
Shredding Disc (F) is
on the other side.
Slide them out WITH
GREAT CARE; THE
BLADES ARE VERY
SHARP.
8. Lift out the foam block.
9. Remove the instruction/
recipe book.
10. Lift out the video from
its space in the
cardboard frame on
one side of the box.
Then lift out the
cardboard frame.
11. The housing base with
work bowl, metal blade
and cover are at the
bottom of the box.
The metal blade is
loose in the work bowl
beneath a foam insert.
Do not reach into feed
tube. Do not turn over
work bowl without first
removing metal blade.
Remove work bowl
cover by turning it
clockwise and lifting.
12. Remove the base
and bowl together
by grasping the
plastic bowl at the
top with both hands
and lifting the bowl
straight up. Do not
rotate the bowl
clockwise on the base.
This will cause the
bowl to separate
from the base.
13. Place the food
processor on the
counter or table.
Remove foam cylinder
insert from top of metal
chopping blade. Read
the instructions
thoroughly before using
the machine.
14. Save the shipping
cartons and plastic
foam blocks. You will
find them very useful if
you need to repack the
processor for moving or
other shipment.
Please watch the
enclosed How-to video
before using the food
processor.
NOTE: Remember to
return your completed
product registration card
with all information
carefully filled out.
WHEN
REMOVING BLADE:
CAREFULLY REMOVE
THE METAL BLADE BY
GRASPING THE CENTRE
WHITE HUB AND LIFTING
IT STRAIGHT UP.
NEVER TOUCH THE
BLADES, AS THEY ARE
RAZOR SHARP.
2