Technical data

8
Note: Discs with fixed stems will not fit
into the blade and disc holder.
REMOVING DISCS
To remove a disc, grasp the disc by placing
your thumb on the edge of the disc and your
fingers under the center lock on the stem
attachment plate. Pull the disc straight out.
CAUTION: NEVER GRASP A DISC BY THE
BLADE EDGE.
CONNECTING TO
DISC HOLDER
For expanded storage capacity, the Cuisinart
®
Blade and Disc Holder can be used with the
Cuisinart
®
Disc Holder (model DH-4). The two
holders were designed with similar lines and
curves to create an attractive storage center
when placed side by side. You can create
any combination of blade and disc holders
and disc holders to suit your food processor
accessory storage needs.
CLEANING AND CARE
The blade and disc holder is made of
a high-impact plastic that has a smooth,
easy-to-clean surface. Occasionally wipe your
blade and disc holder with a cloth or sponge
that has been dipped in warm soapy water.
To remove stubborn spots, use a mild soap
solution, then wipe with a damp sponge.
Do not put the blade and disc holder in the
dishwasher. Blades, disc stem and discs
should always be clean when they are put into
the blade and disc holder. The blade and disc
holder is not meant for temporary storage of
soiled blades between periods of use.
MACHINE FUNCTIONS
PULSE
1. With the machine properly assembled
and engaged, and ingredients in the
work bowl, press the PULSE button
repeatedly as needed.
ON (Continuous)
1. Properly assemble and engage the
machine.
2. To add ingredients through the feed tube,
remove the pusher and fill the feed tube
as directed (see preparing for slicing or
shredding).
3. Engage the pusher and press the ON
button. The button light will turn on and
the motor will start.
4. Press the pusher firmly down until all
ingredients have passed into the
work bowl.
Remove the pusher and refill ingredients
as needed. When you engage the pusher
again, the unit will automatically turn ON.
5. Press the OFF button when finished.
DOUGH Button
1. Prepare the dough ingredients and place
in work bowl.
2. Properly assemble and engage the work
bowl cover and pusher.
3. Press the DOUGH button and the light
will turn on.
4. Then press the ON or PULSE buttons as
needed to process DOUGH. The ON light
will turn on.
NOTE: The dough mode works in
conjunction with the ON button. The machine
will not operate if only the DOUGH button is
pushed. You must also push the ON button
to activate the DOUGH function.
5. Press the OFF button when finished.
FOOD PROCESSOR
OPERATING
INSTRUCTIONS
Try chopping some practice foods, such as
zucchini or potatoes, before you process food
to eat. First, cut the ingredients into 1-inch
pieces of even size and length.
• Place the work bowl over the center stem,
with the handle area just left of center.
Turn counterclockwise to lock in place.
• Insert the metal chopping blade and put
ingredient pieces in the work bowl. Put
on the cover and turn counterclockwise
to lock onto work bowl. Align the pusher
and the pusher’s activating rod with the
corresponding openings on the feed tube,
and push all the way down.
• Press and release the PULSE button two
or three times. Each time the blade stops,