Specifications

10
Inserting the Charcoal Water Filter
N.B. Your appliance is supplied with two charcoal water  lters.
It is strongly recommended that the water  lter is replaced after 90 days or 90 uses; more often if you have
hard water. Failure to do so can lead to a build-up of limescale and affect the performance of your appliance.
Replacement  lters can be purchased directly from the manufacturer, (see “UK After Sales Service”section
for further details).
ß Remove the  lter from its packaging and soak in cold tap water for 15 minutes.
ß To remove the water  lter holder, simply lift it out from its opening on the inner wall of the reservoir.
ß Hold stem in one hand. With your other hand, gently press the compartment door down and pull outwards
to  ip open.
ß Place the  lter in the holder and close the compartment cover; you will hear a snap indicating  lter is in
place. N.B. Caution must be used when inserting the charcoal  lter. Improper placement in the holder can
cause tearing of the  lter skin.
ß Hold the  lter under cold running tap water for 10 seconds to  ush. Hold the water  lter holder horizon-
tally, directly under the water stream so that the water  ows through the  lter compartment.
ß Allow the  lter to drain completely.
ß Replace the water  lter holder into its opening on the inner wall of the reservoir, pushing it all the way
down to the base of the unit.