Owner Manual

4. Assembly Instructions
Step 3:
Remove Air rent handle from
vent and screws(AA) and
nuts(CC) to connect the vent
to the smoker. Then insert
the air vent handle onto the
air vent.
Step 1:
Turn smoker body upside down.
Use screws (AA) to connect legs
to the bottom of the smoker body.
Match legs with stickers to the
stickers on the smoker body.)
Step 4:
Use screws (DD), nuts (FF) and
washers (GG) to connect han-
dles to smoker.
Step 5:
a. Remove door handle lock (with
washer and nut) from door handle.
b. Insert door handle shaft through
door handle hole. Reattach door
handle lock (with washer and nut)
to door handle shaft.
Step 2:
Flip smoker right-side up. Use
screws (BB) to connect burner
box to smoker.
Remove all the contents from packaging, and ensure all parts are present before attempting
to assemble. (See Parts List on page 4)
a.
b.
6
7
NutWasher