Operating instructions

3
2
4 5
1
2
1
4 5
OPERATING INSTRUCTIONS 1. Fill the beverage bottle with chilled
water up to the indicated “WATER FILL LINE."
2. Insert the carbonator head into the
bottle and screw down firmly until it is tightly fitted to the bottle (fig. a).
3. Use the toggle to make sure the
safety window is fully open on the charger chamber.
4. Insert a disposable CO
2
charger into
the open window of the charger chamber, narrow end facing down (fig. b), and ensure the charger is inserted firmly in place by gently pushing the disposable CO
2
charger
back until you hear a click.
NOTE: Only use Cuisinart
CO
2
Chargers powered by
Soda Sparkle.
5. Place the correctly filled beverage
bottle with attached carbonator head in an upright and stable position on a clean, flat surface. Lower the charger chamber down onto the carbonator head to engage the activating thread (fig. c). Screw the charger chamber clockwise onto the carbonator head. The safety window will automatically close and lock prior to piercing the CO
2
charger.
6. Continue to firmly turn the charger
chamber clockwise until you can not tighten anymore and the CO
2
charger is pierced. You will see the CO
2
release into the bottle and hear
a hissing sound and small associated release of excess CO
2
through the carbonator head safety release valve – a normal part of the carbonation process. NOTE: Wait at least 30 seconds for full carbonation to take place.
7. Slowly unscrew and remove the
charger chamber from the
carbonator head. Slide the safety window open using the slider button and eject the used CO
2
charger
through the window by pushing your index finger through the hole provided.
8. Shake the bottle thoroughly for
5 seconds (fig. d) to complete the carbonation process.
9. Slowly unscrew the carbonator
head and remove, then enjoy your sparkling water. NOTE: Once opened, use only the standard bottle cap to reseal the bottle. The sparkling nozzle cap should be used only when carbonating.
If you would like, you can add a
natural flavour stick to your glass of sparkling water for a refreshing, flavored soda (fig. e).
NOTE: Never pour in flavour
before carbonating.
10. The supplied bottle cap will
maintain a residual pressure and can be placed on the bottle to keep the contents from going flat (fig. f).
PARTS AND FEATURES 1. Charger chamber with
toggle-closing safety window Designed to directly carbonate pre-chilled water using Cuisinart Single-Use Recyclable CO
2
Chargers – Powered by SodaSparkle
®
2. Carbonator head
Uniquely patented to automatically maintain optimal residual pressure in the bottle after carbonation to keep the contents from going flat.
3. Reusable 1-liter BPA-free
beverage bottle
4. 5 Disposable CO
2
chargers
a. Each 8-gram CO
2
charger
carbonates 1 liter of cold water
b. Not refillable, but 100%
recyclable and they never expire
5. Flavour packets: 10-pack a. Each flavour packet
flavours 1 8oz. glass of carbonated water
BEFORE FIRST USE • Remove all packaging materials and
any promotional labels or stickers from your Compact Sparkling Beverage Maker. Be sure all parts (listed in Parts and Features) of your new drink maker have been included before discarding any packaging materials.
• You may want to keep the box
and packing materials to use at a later date.
• Before using your Cuisinart Sparkling
Beverage Maker for the first time, remove any dust from shipping by wiping the unit with a damp cloth.
• Thoroughly clean 1-liter beverage
bottle, carbonator head and charger chamber in warm soapy water (maximum temperature 122°F/50°C). Use only regular dish soap for washing; never use any abrasive materials or scourers. Never wash any components in the dishwasher.
fig. e
fig. d
fig. f
fig. a
fig. b
fig. c